Canmore, Alberta

Acreage & Driveway Paving in Canmore

Heavy-duty paving for rural properties — serving Canmore and surrounding Southern Alberta communities.

Expert Acreage & Driveway Paving Built for Canmore

New driveway installation, resurfacing, and full base prep for acreages, farms, and rural commercial properties.

Canmore's mountain elevation creates extreme UV exposure and rapid freeze-thaw cycles requiring premium-grade materials. Crax Asphalt has been delivering professional asphalt services across Calgary and Southern Alberta since 1994 — and we bring the same crew, the same premium materials, and the same 1-year warranty to every acreage paving job in Canmore.

Why Canmore Properties Need Professional Acreage & Driveway Paving

Canmore's mountain elevation creates extreme UV exposure and rapid freeze-thaw cycles requiring premium-grade materials. Acreage and rural driveways in the Canmore area face heavy load stress from farm equipment, trailers, and trucks — combined with drainage challenges and the most extreme freeze-thaw conditions in Alberta. Proper base prep, drainage design, and high-spec asphalt are non-negotiable.

Our Acreage & Driveway Paving Process

  1. Survey: Walk the route, identify drainage issues, culvert needs, and base condition.
  2. Base prep: Grade and compact crushed gravel base to spec — 6–12 inches depending on use.
  3. Pave: Hot-mix asphalt placed and rolled in lifts to match design thickness.
  4. Maintain: Crack fill every 2–3 years and sealcoat every 3 years to maximize lifespan.

Where We Work in Canmore

We service Three Sisters, Cougar Creek, Spring Creek, Bow Valley Trail, Silvertip. Whether you're a homeowner, a property manager, a strata board, or a commercial operator — same standard, same warranty, same honest quote. What we quote is what you pay.

Heads up: Our Canmore schedule fills quickly during peak season. Book your free on-site estimate early — most repairs are completed within 48 hours of booking.

Canmore · acreage paving

Frequently Asked Questions

For typical passenger vehicle use, 2.5–3 inches of compacted asphalt over a properly prepared 6-inch crushed gravel base. For driveways used by farm equipment or heavy trucks, we recommend 3–4 inches over 8–12 inches of base.
Yes — proper base prep is the most critical part of a long-lasting acreage driveway. We grade, install fabric where needed, place and compact the gravel base, then pave. One contractor for the entire job.
We do a lot of long acreage driveways in Canmore and the surrounding area. The economics get better at scale — per-foot cost drops with length. Free on-site quotes for any size project.
Often yes — depending on base condition, an overlay (resurfacing) can restore a driveway at 40–60% of replacement cost. We assess base integrity first and only recommend overlay where the base is sound.