Chestermere, Alberta

Sealcoating in Chestermere

Protect & beautify your asphalt — serving Chestermere and surrounding Southern Alberta communities.

Get a Free Estimate 📞 403-305-9968

Expert Sealcoating Built for Chestermere

Premium commercial-grade asphalt emulsion sealant — defends against UV, oil, salt, and freeze-thaw damage.

Chestermere's lakeside community with high water table and unique moisture challenges that accelerate asphalt deterioration without proper maintenance. Crax Asphalt has been delivering professional asphalt services across Calgary and Southern Alberta since 1994 — and we bring the same crew, the same premium materials, and the same 1-year warranty to every sealcoating job in Chestermere.

Why Chestermere Properties Need Professional Sealcoating

Chestermere's lakeside community with high water table and unique moisture challenges that accelerate asphalt deterioration without proper maintenance. UV oxidation begins damaging asphalt the day it's installed, and Alberta's intense summer sun combined with winter freeze-thaw makes sealcoating essential for Chestermere properties. A proper sealcoat every 2–3 years can double the life of your pavement.

Our Sealcoating Process

  1. Prep: Power-sweep and clean — sealant won't bond to dirt or oil residue.
  2. Repair: Crack-fill and patch first — sealcoating over damage traps moisture and accelerates failure.
  3. Apply: Two-coat application of commercial-grade asphalt emulsion sealant using spray or squeegee.
  4. Cure: 24–48 hour cure time before traffic. We provide cones and barriers if needed.

Where We Work in Chestermere

We service Westmere, Rainbow Falls, Kinniburgh, Lakeview Landing, Chelsea. Whether you're a homeowner, a property manager, a strata board, or a commercial operator — same standard, same warranty, same honest quote. What we quote is what you pay.

Heads up: Our Chestermere schedule fills quickly during peak season. Book your free on-site estimate early — most repairs are completed within 48 hours of booking.

Chestermere · sealcoating

Frequently Asked Questions

Every 2–3 years for commercial lots, every 3 years for residential driveways. High-traffic surfaces or areas with heavy oil/chemical exposure may benefit from more frequent application.
Typically 24–48 hours depending on temperature and humidity. In cooler weather we recommend the full 48. We always advise on specific cure times for your project conditions.
No — sealcoating is a protective surface treatment, not a structural filler. We always recommend crack filling and pothole repair first, then sealing the sound surface. Sealing over damage masks the problem temporarily and accelerates failure.
Honestly, no. Big-box brush-on sealers wash off in a season and provide minimal protection. Professional commercial-grade asphalt emulsion is far more durable, applied at the correct thickness with proper equipment.

Sealcoating also offered in:

Calgary Calgary NW Calgary SW Calgary SE Calgary NE Okotoks High River Airdrie Cochrane Strathmore Drumheller Vulcan